ACS150 Technical Specification and Control Connections
Below is a technical specification of the ACS150.
| Mains Connection | |
| Voltage and Power Range | 1 phase, 200 to 240V ± 10% |
| 0.37 to 2.2 kW (0.5 to 3 hp) | |
| 3-phase, 200 to 240 V ± 10% | |
| 0.37 to 2.2 kW (0.5 to 3 hp) | |
| 3-phase, 380 to 480 V ± 10% | |
| 0.37 to 4kW (0.5 to 5 hp) | |
| Frequency | 48 to 63Hz |
| Power factor | 0.98 |
| Motor Connection | |
| Voltage | 3-phase, from 0 to Usupply |
| Frequency | 0 to 500 Hz |
| Continuous loading capability | Rated output current I2N |
| (constant torque at a max. ambient temperature 40oC) | |
| Overload capability (at a max. ambient temperature of 40oC) |
At heavy duty use 1.5 x I2N for 1 minute every 10 minutes At start 1.8 x I2N for 2 s |
| Switching frequency Default Selectable |
4kHz 4 to 12 kHz with 4 kHz steps |
| Acceleration time | 0.1 to 1800 s |
| Deceleration time | 0.1 to 1800 s |
| Braking | Inbuilt brake chopper as standard |
| Environmental Limits | |
| Ambient temperature | -10 to 40oC (14 to 104F), no frost allowed, 50oC (122F) with 10% derating |
| Altitude Output current |
Rated current available at 0 to 1000m (0 to 3281 ft) reduced by 1% per 100m (328 ft) over 1000 to 2000m (3281 to 6562 ft) |
| Relative humidity | Lower than 95% (without condensation) |
| Protection class | IP20 / Optional NEMA 1 enclosure |
| Enclosure colour | NCS 1502-Y, RAL 9002, PMS 420C |
| Contamination levels | IEC721-3-3 |
| No conductive dust allowed | |
| Transportation | Class 1C2 (chemical gases) |
| Class 1S2 (solid particles) | |
| Storage | Class 2C2 (chemical gases) |
| Class 2S2 (solid particles) | |
| Operation | Class 3C2 (chemical gases) |
| Class 3S2 (solid particles) | |
| Chokes | |
| AC input chokes | External option. |
| For reducing THD in partial loads and to comply with EN61000-3-2. | |
| AC output chokes | External option. To achieve longer motor cables. |
| Programmable Control Connections | |
| One analogue input | |
| Voltage signal | 0 (2) to 10 V, Rin > 312kΩ |
| Current signal | 0 (4) to 20 mA, Rin = 100Ω |
| Resolution | 0.1% |
| Accuracy | ± 1% |
| Auxiliary Voltage | 24 V DC ± 10% |
| Five digital inputs | 12 to 24 V DC with internal or external supply, PNP and NPN, pulse train 0 to 16kHz. |
| Input impedance | 2.4kΩ |
| One relay output | |
| Type | NO + NC |
| Maximum switching voltage | 250 V AC / 30 V DC |
| Maximum switching current | 0.5 A/30 V DC; 5 A/230 V AC |
| Maximum continuous current | 2 A rms |
| Product Compliance |
| Low voltage Directive 73/23/EEC with supplements |
| Machinery directive 98/37/EC |
| EMC Directive 89/336/EEC with supplements |
| Quality assurance system ISO 9001 |
| Environmental systems ISO 14001 |
| UL, cUL, CE, C-Tick, and GOST R approvals |
| EMC (according to EN61800-3) |
| 2nd environmental filter, unrestricted distribution with 30m (98ft) cable inbuilt as standard |