|
Click to send us a
|
|
|
ABB Drives - ACS50 Technical Specifications
Mains Connection
| Power range |
0.18 to 2.2 kW |
| Voltage |
1-phase, 110 to 120 V and 200 to 240 V, +10 /
-15% |
| Frequency |
48 to 63 Hz |
Motor Connection
| Voltage |
3-phase, from 0 to Usupply
(for 110 / 115 V from 0 to 230 V) |
| Frequency |
0 to 120 / 130 Hz |
| Overload capacity |
150% (60 s) |
| Switching frequency standard |
5 kHz, adjustable up to 16 kHz with automatic
switching frequency reduction |
| Acceleration time |
0.1 to 30 s |
| Deceleration time |
0.1 to 30 s |
Environmental Limits
|
|
Top image shows a Potentiometer being fitted. Second
image shows an external EMC filter for 1st and 2nd
environment |
| Ambient temperature |
| 0 to 40oC |
with nominal current and 5 kHz with switching frequency |
| up to 50oC |
with derating |
| -20oC |
with restrictions |
| Altitude |
| Output Current |
Nominal current : 0 to 1000 m |
| |
reduced by 1% per 100 m over 1000 m to 2000 m |
| Relative humidity |
lower than 95% (without condensation) |
| Protection class |
IP 20 |
| Contamination levels |
No conductive dust allowed, corrosive liquids or gases
(IEC60721-3-3) |
Control Connections
| One Analogue Input |
| Voltage signal |
0 (2) to 10 V, 200 kΩ single
ended |
| Current signal |
0 (4) to 20 mA, 100 Ω single
ended |
| Potentiometer reference value |
10 V ±2% max. 10 mA,
1kΩ ≤
R ≤ 10 kΩ |
| Response time |
≤ 60 ms |
| Resolution |
0.1% |
| Accuracy |
± 1% |
| Three digital inputs |
12 V DC with internal or 12 V ... 24 V DC external
supply, PNP |
| Input impedance |
1.5 kΩ |
| Response time |
≤ 9 ms |
| One Relay Output |
| Switching voltage |
12 to 250 V AC or max 30 V DC |
| Maximum continuous current |
2 A |
Product Compliance
- Low Voltage Directive 73/23/EEC with supplements
- EMC Directive 89/336 / EEC with supplements
- Quality assurance system ISO 9001 and environmental system
ISO 14001
- CE, UL, cUL, CSA, C-Tick and GOST R approvals
|
