TML Cable Flat - Type A for Process Water, Type B Drinking Water
Special cable for the permanent use in process water type A - drinking water type B. Adapted to DIN VDE 0250 and DIN VDE 0282.
Application - As connection cable for submersible electric motors (pumps) for the permanent use in process and drinking water up to a temperature of 70oC.
- Excellent insulation properties in water
- Very low water absorption
- Preservation of the mechanical strength
- BAM* certificate VI.31/10904/01 - confirming the suitability of TML type B in drinking water.
Characteristics at 20oC:
- Rated voltage Uo/U - 600/1000V
- Maximum admissible operating voltage:
- in 1 ph and 3 ph systems : 720 / 1200V
- in D C systems : 1800 V
- conductor resistance to DIN / VDE 0295
- Test voltage 50Hz, 5 min : 2500 V
Temperature range:
- Maximum admissible conductor
- Temperature in operation 90oC
- Short circuit temperature 250oC
Fixed : -40oC up to + 80oC
In motion : -25oC up to + 80oC
Tensile stress : maximum 15 N each sqmm conductor cross section
| No. of cores x cross section mm2 |
Copper Content | Outer Dimensions approx mm x mm |
Net weight approx kg / km |
| 3 x 1.5 | 43.0 | 13. x 7 | 125 |
| 3 x 2.5 | 72.0 | 16 x 8 | 185 |
| 3 x 4 | 115.0 | 19 x 9 | 290 |
| 3 x 6 | 173.0 | 23 x 10 | 400 |
| 3 x 10 | 288.0 | 28 x 12 | 620 |
| 3 x 16 | 461.0 | 31 x 14 | 900 |
| 3 x 25 | 720.0 | 37 x 17 | 1150 |
| 3 x 35 | 1008.0 | 38 x 17 | 1550 |
| 3 x 50 | 1440.0 | 45 x 20 | 2200 |
| 3 x 70 | 2016.0 | 52 x 22 | 2900 |
| 3 x 95 | 2736.0 | 58 x 25 | 3800 |
| 4 x 1.5 | 58.0 | 17 x 7 | 160 |
| 4 x 2.5 | 96.0 | 20 x 8 | 250 |
| 4 x 4 | 154.0 | 24 x 9 | 340 |
| 4 x 6 | 230.0 | 26 x 10 | 450 |
| 4 x 10 | 384.0 | 31 x 11 | 850 |
| 4 x 16 | 614.0 | 36 x 13 | 1200 |
| 4 x 25 | 960.0 | 45 x 15 | 1600 |
| 4 x 35 | 1344.0 | 48 x 17 | 2100 |
| 4 x 50 | 1920.0 | 59 x 20 | 2900 |