Danfoss KP and KPI pressure switch

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications.
The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly.

• Pressure ranges: -0.2 to21 bar
• High contact load - Ultra short bounce-time
• Also available with gold plated contact systems
• Media: Gaseous media and air
• Enclosure IP44 when mounted with top cover and back plate
• Also available with enclosure IP55 for OEM customers
• Small dimensions - space saving - easy to install
• Shock and impact resistant
• Click for the Danfoss Acrobat manual

Technical Data

	KPI	KP
Media :	Liquid and gases	Liquid and gases
Media temperature :	-40oC to 100oC	-40oC to 100oC
Ambient temperature :	-40oC to 65oC (reduced life to 80oC)	-40oC to 65oC (reduced life to 80oC)
Enclosure :	IP33; with top cover or protection cap : IP44	IP33; with top cover or protection cap: IP44
Electrical connection :	Cable entry for diameters 6mm to 14mm	Cable entry for diameters 6mm to 14mm
Contact system :	SPDT	SPDT
Contact load :	AC-1 Ohmic : 10A, 440V	16A, 400V
	AC-3 (motor) : 6A, 440V	16A, 400V
	AC14/16 (coil / transformer) 4A, 440V	10A, 400V
	DC-13/14 : 12W 220V	12W 220V

Click here to buy on-line now - or call Ray - CSE's Danfoss Consultant on 023 8063 3055.

Ordering - KP for gases (and water on a direct connection only) do not use capillary mounting):

Code No.	Type	Setting range (rising pressure) (bar)	Adjustable differential (Bar)	Permissible operating pressure (bar)	Pressure connection	Weight
060-113366	KP 35	-0.2 to 7.5	0.7 to 4.0	17	G 1/4 A	0.33
060-110866	KP 36	2 to 14	0.7 to 4	17	G 1/4 A	0.32
060-122166	KP 36	4 to 12	0.5 to 1.6	17	G 1/4 A	0.34
Ordering - KPI for liquid and gases:
060-121766	KPI 35	-0.2 to 8	0.4 to 1.5	18	G 1/4A	0.34
060-121966	KPI 35	-0.2 to 8	0.5 to 2	18	G 1/4A	0.34
060-118966	KPI 36	4 to 12	0.5 to 1.6	18	G 1/4A	0.34