About Us  Contact Us  Blog!  Home
CSE Industrial Electrical Distributors CSE Head Office
CSE Head Office :
01628 529448
CSE Southampton
CSE Southampton :
023 8063 3055
CSE Cables
CSE Cables :
01628 850024
ABB Drives Motor Control Gear Circuit Protection Switch Gear Special Offers Cable Industrial Controls
Danfoss Drives Cable Management Control Gear Tools & Accessories Power Distribution Enclosures Buy On-Line

Click to email Ray -  CSE's Danfoss consultant or call
023 8063 3055

Click to send us a

 

MBT 5252 Temperature sensors
MBT 5252 Temperature sensors

MBT 5252, Temperature sensors

The MBT 5252 is a heavy-duty temperature sensor that can be used for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications.

This temperature sensor is based on a standardized Pt100 or Pt1000 element, which gives a reliable and accurate measurement. The MBT 5252 can be delivered with NTC/PTC elements on request.

If needed, a transmitter (MBT 9110) can be ordered as an integrated part of the sensor. In the low temperature version (-50 °C to +200 °C) the measuring insert is based on a silicone cable, which makes the sensor very resistant towards vibrations.

  • All parts in contact with the media are made of stainless steel AISI 316 Ti. The MBT 5252 is equipped with a B-head as standard, but can be delivered with B-mini or B-head with screw cap on request. For gaseous or liquid media, e.g. air, gas, vapour, water or oil
  • Up to +400° C media temperatures
  • Available with built-in transmitter
  • Available with all relevant marine approvals
  • Click to view the Danfoss MBT 5250 Technical PDF Brochure

Technical Data

Measuring range : -50oC to 200oC  (400oC on request)
Max ambient temperature : Max 85oC (depending on media temperature)
Enclosure : IP65
Cable Entry : Pg16
Temperature transmitter : MBT 9110: Supply voltage 8 to 35 V d.c. Output : 4 to 20mA
Materials : Process connection, Protection tube, extension tube: AISI 316 Ti
  Union nut : Nickel plated brass
Connection head : Die cast aluminium
Tolerance : EN60751 Class B ±(0.3+0.005 x t)
Response times (t0.9: 42 sec. (water at 0.2 m/s). With heat conductive compound, 041E0110: 14 secs
Code No. Measuring range oC Insertion length Electrical connection Process connection Protection Tube High temperature  
084Z8210 -50 to 200 50 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm Buy now
084Z8211 -50 to 200 100 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm Buy now
084Z8212 -50 to 200 150 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm Buy now
084Z8213 -50 to 200 200 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm Buy now
084Z6272 -50 to 400 50 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm Buy now
084Z6273 -50 to 400 100 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm  
084Z6274 -50 to 400 150 mm 2 wire, 3 terminals G 1/2A ø10 x 2 mm ø11 x 1 mm  
084Z8230 -50 to 200 50 mm 2 wire, 3 terminals G 3/4A ø10 x 2 mm ø11 x 1 mm Buy now
084Z6164 -50 to 200 80 mm 2 wire, 3 terminals G 3/4A ø10 x 2 mm ø11 x 1 mm  
084Z8231 -50 to 200 100 mm 2 wire, 3 terminals G 3/4A ø10 x 2 mm ø11 x 1 mm Buy now


     
 

CSE Industrial Electrical Distributors; Email : - Tel:01628 529448; Fax:01628 810093;
Cable Enquiries Tel
: 01628 850024; Email :

Tel : International enquiries +44 (0)1628 529448, International Fax - +44 (0)1628 810093 , Tel : South UK - 023 8063 3055