Mini Contactor Relays
With just four frame sizes up to 170 A, the new DILM contactors are significantly more compact than their predecessors, and include an integral auxiliary contact for contactors up to 32A. They are perfectly complemented by the DILA contactor relays - available as basic units with four cnotact paths, they can be extended to eight contacts by using top mounting auxiliary modules. For cost effective solutions where a switched neutral is required, four pole contactors are also available.
The motor starter combinations comprise a PKZMO motor-protective circuit-breaker and xStart contactor. Both devices are mechanically interconnected via a plug-in element. The electrical connection is provided by a plug-in contact element, using the unique toolless plug connection technology.
Feature and Benefits
- Reduced power consumption coils mean lower heat dissipation and smaller control transformers
- Coil terminals on the front face simplify connection
- Twin box terminals allow the secure connection of differing cable cross-sections and facilitate the 'looping' of cables.
- Voltage tolerance of the coils exceeds IEC/EN 60947 standard, ensuring effective protection in th event of under and over voltage
- Identical frame size for AC and DC devices simplifies engineering
- DC devices have integral suppressors and low consumption coils, that can be operated directly from PLC outputs saving time and expense
- Unique toolless plug connection for MSC motor starters significantly reduces installation time
Mini Contactor Relays |
Contacts | Part Number |
| AC Coil | 2 N/O + 2 N/C | DILER-22(24V50HZ) |
 |
2 N/O + 2 N/C | DILER-22(110V50HZ) |
| 2 N/O + 2 N/C | DILER-22(230V50HZ) | |
| 3 N/O + 1 N/C | DILER-31(24V50HZ) | |
| 3 N/O + 1 N/C | DILER-31(110V50HZ) | |
| 3 N/O + 1 N/C | DILER-31(230V50HZ) | |
| 4 N/O | DILER-40(24V50HZ) | |
| 4 N/O | DILER-40(110V50HZ) | |
| 4 N/O | DILER-40(230V50HZ) | |
| DC Coil | 2 N/O + 2 N/C | DILER-22-G(24VDC) |
|
3 N/O + 1 N/C | DILER-31-G(24VDC) |
| 4 N/O | DILER-40-G(24VDC) | |
Auxiliary Contact Modules |
||
| Top Mounting | ||
 |
1 N/O + 1 N/C | 11DILE |
| 2 N/O + 2 N/C | 22DILE | |
| 3 N/O + 1 N/C | 31DILE | |
Contactor Relays |
||
| AC Coil | 2 N/O + 2 N/C | DILA-22(24V50HZ) |
 |
2 N/O + 2 N/C | DILA-22(110V50HZ) |
| 2 N/O + 2 N/C | DILA-22(230V50HZ) | |
| 3 N/O + 1 N/C | DILA-31(24V50HZ) | |
| 3 N/O + 1 N/C | DILA-31(110V50HZ) | |
| 3 N/O + 1 N/C | DILA-31(230V50HZ) | |
| 4 N/O | DILA-40(24V50HZ) | |
| 4 N/O | DILA-40(110V50HZ) | |
| 4 N/O | DILA-40(230V50HZ) | |
| DC Coil | 2 N/O + 2 N/C | DILA-22(24VDC) |
|
3 N/O + 1 N/C | DILA-31(24VDC) |
| 4 N/O | DILA-40(24VDC) | |
Auxiliary Contact Modules |
||
| Top Mounting | 2 N/C | DILA-XHI02 |
 |
1 N/O + 1 N/C | DILA-XHI11 |
| 2 N/O | DILA-XHI20 | |
| 1 N/O (EM) + 1 N/C (LB) | DILA-XHIV11 | |
 |
4 N/C | DILA-XHI04 |
| 1 N/O + 3 N/C | DILA-XHI13 | |
| 2 N/O + 2 N/C | DILA-XHI22 | |
| 3 N/O + 1 N/C | DILA-XHI31 | |
| 4 N/O | DILA-XHI40 | |
| 2 N/O (2 EM) + 2 N/C (1 LB) | DILA-XHIV22 | |
| Side Mounting | 1 N/O | DILA-XHI10-S |
 |
1 N/C | DILA-XHI01-S |
DILA - contactor relays can also be combined with electronic timing modules
DILA-XHI - auxiliary contact modules can also be fitted to contactors up to DILM32
Only 2 pole auxiliary contact modules should be used wiht DILA22