A complete set of terminal block marking solutions to fit your marking
requirements:
End Stops
|
Jumpers
|
End Sections
|
| Choose between the robust BAM3 and the high
BAZH1 for double
deck and power blocks. All compatible with label holders.
 |
Simplify the block interconnection with the isolated screwless
jumper JB… available for 4 to 16 mm˛
10 to 4 AWG terminal blocks.
 |
One end section ES4 for the core feed-through range from 4 mm˛ to 95 mm˛ 10 to 000 AWG. Just three
ends sections needed for the entire SNK series range.
 |
|
|
|
|
Circuit Separators
|
Testing Solutions
|
Shielding
|
Separate and easily visualize different parts of your assembly with the universal circuit separator
CS-R1.
 |
Test your assembly up to 15 poles with the test connector
TC… or simply control the voltage with the test adaptor
TP for 2, 2.3 or 4 mm test plug diameter.
 |
Ensure the continuity of your shield connection with the SHB… shield connectors providing rapid and convenient installation.
 |
| |
|
|
Covers
|
Plugs
|
|
PL... individual terminal block protective covers allow the rapid identification of live circuits.
They also limit access to the screw clamp.
KCO transparent mounting kit protective covers reliably restrict
access to your terminal assembly with the possibility of sealing.
 |
PG5 component plugs ease the component
installation (resistors or diodes) with a quick plug-in mounting
system which avoids any soldering.
PG5-R2 plugs fit into the terminal block's jumper
channel for component insertion (resistors, diodes, etc.) between
two terminal blocks.
 |
|
