Harmonised Cable Core Colours

1 Introduction

The requirements of BS 7671 were harmonized with the technical intent of CENELEC Standard HD 384.5.514: Identification, including 514.3: Identification of conductors, now withdrawn. Amendment No 2: 2004 (AMD 14905) to BS 7671:2001 implemented the following: The harmonized cable core colours and the alphanumeric marking of the following standards: HD 308 S2:2001 Identification of cores in cables and flexible cords BS EN 60445:2000 Basic and safety principles for man-machine interface, marking and identification of equipment terminals and of terminations BS EN 60446:2000 Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or numerals. This appendix provides guidance on marking at the interface between old and harmonized colours and marking general guidance on the colours to be used for conductors. In the British Standards for fixed and flexible cables the colours have been harmonized. BS 7671 has been modified to align with these cables, but also allows other suitable methods of marking connections by colour (tapes, sleeves or discs), or by alphanumerics (letters and/or numbers). Methods may be mixed within an installation.

2 Addition or alteration to an existing installation

2.1 Single-phase installation

An addition or an alteration made to a single-phase installation need not be marked at the interface provided that: i) the old cables are correctly identified by the colour red for line and black for neutral, and ii) the new cables are correctly identified by the colour brown for line and blue for neutral.

2.2 Two- or three-phase installation

Where an addition or alteration is made to a two- or three-phase installation wired in the old core colours with cable to the new core colours, unambiguous identification is required at the interface. Cores should be marked as follows: Neutral conductors Old and new conductors: N Line conductors Old and new conductors: L1, L2, L3.

Table 7A – Example of conductor marking at the interface for additions and alterations to an a.c. installation identified with the old cable colours

Function Old conductor New conductor
Colour Marking Marking Colour
Line 1 of a.c.  Red L1 L1 Brown(1)
Line 2 of a.c. Yellow L2 L2 Black(1)
Line 3 of a.c. Blue L3 L3 Grey(1)
Neutral of a.c. Black N N Blue
Protective conductor Green-and-yellow

Green-and-yellow

3 Switch wires in a new installation or an addition or alteration to an existing installation

Where a two-core cable with cores coloured brown and blue is used as switch wires, both conductors being line conductors, the blue conductor should be marked brown or L at its terminations.

4 Intermediate and two-way switch wires in a new installation or an addition or alteration to an existing installation

Where a three-core cable with cores coloured brown, black and grey is used as switch wires, all three conductors being line conductors, the black and grey conductors should be marked brown or L at their terminations.

5 Line conductors in a new installation or an addition or alteration to an existing installation

Power circuit line conductors should be coloured as in Table 51. Other line conductors may be brown, black , red, orange, yellow, violet, grey, white, pink or turquoise. In a two- or three-phase power circuit the line conductors may all be of one of the permitted colours, either identified L1, L2, L3 or marked brown, black, grey at their terminations to show the phases.

6 Changes to cable core colour identification

Table 7B – Cable to BS 6004 (flat cable with bare cpc)

Cable type Old core colours New core colours
Single-core + bare cpc Red or black Brown or blue
Two-core + bare cpc Red, black Brown, blue
Alt. Two-core + bare cpc Red, red Brown, brown
Three-core + bare cpc Red, yellow, blue Brown, black, grey

Table 7C – Standard 600/1000V armoured cable

BS 6346, BS 5467 or BS 6724

Cable type Old core colours New core colours
Single-core Red or black Brown or blue
Two-core Red, black Brown, blue
Three-core Red, yellow, blue Brown, black, grey
Four-core Red, yellow, blue, black Brown, black, grey, blue
Five-core Red, yellow, blue, black, green-and-yellow Brown, black, grey, blue, green-and-yellow

Table 7D – Flexible cable to BS 6500

Cable type Old core colours New core colours
Two-core Brown, blue No change
Three-core Brown, blue, green-and-yellow No change
Four-core Black, blue, brown, green-and-yellow Brown, black, grey, green-and-yellow
Five-core Black,blue, brown, black, green-and-yellow Brown, black, grey, blue, green-and-yellow

7 Addition or alteration to a d.c. installation

Where an addition or alteration is made to a d.c. installation wired in the old core colours with cable to the new core colours, unambiguous identification is required at the interface. Cores should be marked as follows:

Neutral and midpoint conductors
Old and new conductors: M


Line conductors
Old and new conductors: Brown or grey, or
Old and new conductors: L, L+ or L-

Table 7E – Example of conductor marking at the interface for additions and alterations to a d.c. installation identified with the old cable colours

Function Old conductor New conductor
Colour Marking Marking Colour

Two-wire unearthed d.c. power circuit





Positive of two-wire circuit Red L+ L+ Brown
Negative of two-wire circuit Black L- L- Grey

Two-wire earthed d.c. power circuit





Positive (of negative earthed) circuit Red L+ L+ Brown
Negative (of negative earthed) circuit Black M M Blue
Positive (of positive earthed) circuit Black M M Blue
Negative (of positive earthed) circuit Blue L- L- Grey

Three-wired d.c. power circuit





Outer positive of two-wire circuit derived from three-wire system Red L+ L+ Brown
Outer negative of two-wire circuit derived from three-wire system Red L- L- Grey
Positive of three-wire circuit Red L+ L+ Brown
Mid-wire of three-wire circuit Black M M Blue
Negative of three-wire circuit Blue L- L- Grey

Want Monthly Offers, Promotions & News?

Sign up now to be the first to know about special offers, product news and industry information.

Thank you for signing up to the newsletter