ABB DS201 C40 AC100 RCBO, Type AC 1P+N 6kA 40A C Curve 100mA 2CSR255080R2404

Code: DS201C40AC100

Buy ABB DS201 C40 AC100 RCBO, Type AC 1P+N 6kA 40A C Curve 100mA | Order By 1pm For Same Day Shipping

per Each
Was £144.27
£115.42 ex VAT



Available To Order



QtyAdd to Cart

The ABB DS201 C40 AC100 (order code 2CSR255080R2404) is a Type AC RCBO from ABB's DS200 range, combining overcurrent and earth leakage protection in a compact 1P+N, 40A, 100mA device with a 6kA breaking capacity.

The ABB DS201 40A RCBO provides simultaneous protection against overload, short-circuit, and residual current faults in a single compact unit. Designed for residential and commercial electrical installations, it eliminates the need for a separate MCB and RCD, saving valuable board space. Its Type AC sensing detects sinusoidal alternating earth fault currents, making it ideal for standard single-phase circuits.

Key Features

  • 1P+N Configuration: Switches both the live and neutral poles, providing complete single-phase circuit isolation in one device.
  • 40A Current Rating with C Curve: The C curve characteristic suits loads with moderate inrush currents, such as lighting, heating, and general power circuits.
  • 100mA Residual Current Sensitivity: Provides protection against indirect contact — appropriate for fire protection and general circuit protection applications.
  • 6kA Breaking Capacity: Rated to interrupt fault currents up to 6kA, suitable for typical residential and light commercial supplies.
  • Type AC Operation: Detects sinusoidal alternating earth fault currents, covering the majority of standard residential and commercial load types.
  • Wide Temperature Range: Operates reliably from -25°C to +55°C, making it suitable for installation in both indoor and exposed distribution boards.
  • DIN Rail Mounting: Snaps directly onto a standard 35mm DIN rail for quick, straightforward installation within consumer units and distribution boards.
  • Compact Dimensions: At just 35mm wide, the DS201 minimises space usage in the enclosure whilst delivering full RCBO functionality.

Applications

The ABB DS201 C40 AC100 RCBO is suited to residential consumer units, commercial distribution boards, and light industrial panel installations where single-phase circuit protection is required. It is commonly used to protect final circuits supplying general power outlets, lighting, and heating loads. The 100mA sensitivity level is appropriate where fire protection rather than additional personal protection is the primary requirement.

Standards and Compliance

The ABB DS201 complies with IEC/EN 61009, is manufactured in Italy, and carries the relevant international approval markings for use in residential, commercial, and industrial installations.

Supplied by ABB, manufactured in Italy. Order code: 2CSR255080R2404.

Frequently Asked Questions

What is the difference between the ABB DS201 and a standard MCB?

The DS201 is an RCBO — it combines the functions of an MCB (overload and short-circuit protection) and an RCD (earth fault protection) in a single 1P+N device, whereas a standard MCB provides no residual current protection.

What cable sizes can be connected to the ABB DS201 C40 AC100?

The DS201 uses bi-directional cylindrical lift terminals suitable for connection at both top and bottom, with the device dimensions (H85mm x W35mm x D69mm) consistent with standard DS200 series termination arrangements — consult the ABB datasheet for precise conductor cross-section limits.

Is the ABB DS201 suitable for protecting a shower or cooker circuit?

The 40A C curve rating makes the DS201 suitable for high-load circuits, but a 100mA sensitivity is used for fire protection rather than personal protection — for shower circuits, a 30mA device is typically required by BS 7671.

How is the ABB DS201 mounted?

It clips directly onto a standard 35mm DIN rail using the integrated fast-clip device — no tools required for mounting.

Where can I buy the ABB DS201 C40 AC100 RCBO, Type AC 1P+N 6kA 40A C Curve 100mA 2CSR255080R2404 in the UK?

CSE Distributors is an official ABB franchised distributor with branches in Wooburn Green (South Bucks) and Eastleigh (Southampton), offering same-day despatch and next-day delivery nationwide. With over 50 years in business and hundreds of positive customer reviews, CSE is a trusted source for genuine ABB products with full warranty.

Voltage 230-240
Number of Poles 1P + N
Product Range DS200
Current Rating 40A
Temperature Rating -25 to +55°C
Curve Type C Curve
Breaking Capacity 6 kA
Residual Current 100mA
Type Type AC
Item Code DS201 C40 AC100
Alternate Code 2CSR255080R2404
Manufacturer ABB
Weight 0.2 kg
Height 85mm
Width 35mm
Depth 69mm
EAN 8012542048015
Commodity Code 8536303000
Country of Origin Italy

Datasheets and Literature