What's inside

Specify the right drive without opening ten datasheets

Danfoss Franchised distributor since 1974

Your complete guide to Danfoss Drives

Every low-voltage and medium-voltage drive, power converter, filter, soft starter and servo solution Danfoss makes - with power ranges, enclosure ratings and fieldbus support side by side. Built for panel builders, OEMs and specifying engineers.

Compare the iC7, VLT® and VACON® families in one place instead of chasing separate datasheets - power ranges and enclosure ratings from 0.37 kW up to 6 MW (IP00 through IP66/Type 4X), fieldbus support mapped per product across PROFINET, EtherNet/IP, Modbus, BACnet and EtherCAT, plus harmonic filters, power options, DrivePro® services and the MyDrive® software range.

Download the brochure
50+years supplying
UK industry
2 UK branches with
local stock
30 pages of
technical detail

The product overview puts the whole Danfoss portfolio on comparable pages - same layout, same data points, every time.

Danfoss drives product range
Products

Every family, one format

iC7-Automation, Hybrid and Marine alongside the VLT® and VACON® ranges - each with power range, enclosure options and fieldbus support laid out identically so you can compare like for like.

Danfoss drive installation
Power quality

Power options and filters

Active and passive harmonic filters, sine-wave and dU/dt filters, common-mode cores and brake resistors - including what you need to meet IEEE 519-2022 and keep THDi under 5%.

Danfoss DrivePro service engineer
Lifecycle

Software and lifetime service

The MyDrive® Suite tools for selection, commissioning and simulation, plus DrivePro® services covering start-up, spare parts, extended warranty and remote monitoring.

Covered in the brochure

From a 0.37 kW micro drive to a 6 MW marine converter

All of it available to order through CSE, with technical support from people who work with these products daily.

iC7 series

The newest platform - Automation, Hybrid and Marine. Selectable protocols, STO SIL3 as standard and liquid-cooled system modules for high-power integration.

0.37 kW – 6 MW

VLT® drives

AutomationDrive FC 302, HVAC FC 102, HVAC Basic FC 101, AQUA FC 202, Refrigeration FC 103, Midi FC 280 and Lift LD 302.

0.25 kW – 1400 kW

VACON® drives

100 FLOW, 100 INDUSTRIAL, VACON® 20 for OEMs, plus the NXP air- and liquid-cooled families, common DC bus and system drives.

0.25 kW – 5300 kW

Filters and power options

AAF 007 active filter, AHF 005/010 passive filters, sine-wave, dU/dt, common-mode and LCL filters, and brake resistors.

10 A – 880 A

Decentral drives

FCD 302, DriveMotor FCP 106 and VACON® 100 X - rugged, hygienic and IP66 options for mounting close to the motor.

0.37 kW – 37 kW

Motion and servo

The VLT® FlexMotion™ portfolio: MSD 510 multiaxis, ISD® 520 integrated and DSD 520 decentral servo drives.

Up to 39 Nm peak

Soft starters

MCD 100 soft-start controller, MCD 201/202 compact starters with built-in bypass, and the MCD 600 for fixed-speed applications.

0.1 kW – 110 kW

Medium voltage

VACON® 3000 as a ready-to-run enclosed drive or the only MV drive available as a modular kit.

Up to 7060 kVA

Why order Danfoss through CSE

A franchised distributor, not a reseller

We've supplied control panel builders and OEMs since 1974. Danfoss is one of our core franchised lines, which means genuine product, full manufacturer warranty and direct technical backing.

Help choosing the right drive

Tell us the motor, the load and the environment. Our team will size it, flag the filters you'll need and check fieldbus compatibility before you order.

Stock on the shelf

Common frame sizes held at both branches, so a failed drive doesn't become a week of downtime.

Genuine and warranted

Franchised supply means every unit is traceable, current firmware and covered by the full Danfoss warranty.

Two UK branches

High Wycombe and Southampton, both with trade counters, local stock and collection available the same day.

Get the brochure, then talk it through with someone who knows it

Download takes ten seconds. If you'd rather skip straight to a price or a lead time, give us a call - we're happy to spec it with you.

Download

Get your copy of the Danfoss Drives guide

Fill in your details and we will send the brochure straight to your inbox.

Danfoss Drives - product overview

30 pages, PDF, sent straight to your email.