The Belden 4200FE non-paired shielded data cable ideal for commercial applications.
Cable Construction
| Conductor Diameter: | 1.45mm (AWG16) |
| Conductor Material: | Stranded bare copper (19 x AWG29) |
| Insulation Material: | PE |
| Insulation Diameter over Insulation: | 1.95 ± 0.05 mm |
| Insulation Wall Thickness: | 0.25mm |
| Colour Code: | Black - Red |
| Outer Shield: | Beldfoil ® Aluminium Polyester Tape |
| Shield Thickness Alu: | 9 µm |
| Shield Coverage: | 100% |
| Drainwire: | AWG18 (19 x AWG30 Tinned Copper |
| Sheath Material: | FRNC |
| Sheath Colour: | Grey |
| Sheath Nominal Thickness: | 0.38mm |
| Diameter over Sheath: | 4.8 ± 0.30 mm |
Electrical Properties
| Nominal Conductor Resistance: | 13.1/km |
| Nominal Shield Resistance: | 15.4 /km |
| Nominal Capacitance Conductor to Conductor at 1kHz: | 250 pF/m |
| Nominal Capacitance Conductor to Shield + other conductor at 1kHz: | 450 pF/m |
| Test Voltage Conductor to Conductor: | 2500 VDC, 3 Seconds |
| Test Voltage Conductor to Screen: | 2500 VDC, 3 Seconds |
| Voltage Rating: | 300 V RMS |
| Maximum Continuous Current Per Conductor at 25°C: | 6.25 A per Conductor at 25°C |
Mechanical Properties
| Temperature Range Processing and Operating: | -20 to +70 °C |
| Temperature range storage: | -30 to +70 °C |
| Minimum Bending / Setting Radius: | 5*D/10*D |
| Maximum pulling tension: | 200 N |
| Halogen free: | IEC 60754-1 |
| Non dense smoke: | IEC 61034-1 and 61034-2 |
| Non corrosive gas: | IEC 60754-2 |
| Flame Retardant: | IEC 60332-1 |
Cable Marking : NEW GENERATION® BY BELDEN 4200FE HALOGEN FREE 70C 2C16 SHIELDED + sequential meter marking.
