22 AWG (7 x 30) Tinned copper, Pe insulated 1 Twisted pair , Beldfoil Aluminium-Polyester Shield with Z-fold, 22 AWG (7 x 30) tinned copper drainwire and Low Smoke No Halogen jacket
Cable Construction
| Nominal Insulation Thickness: | 0.38mm |
| Nominal Diameter over Insulation: | 1.57mm |
| Twisted Pair Lay Length: | 40mm |
| Nominal Jacket Thickness: | 0.89mm |
| Nominal Outer Diameter: | 4.9mm |
| Insulation material: | Pe |
| Sheath Material: | Low Smoke No Halogen (LSNH) |
| Sheath Colour: | Chrome RAL 7037 |
| Shield: | 100% Aluminium Polyester |
Mechanical Properties
| Temperature Rating: | -15 to +80°C |
| Maximum Pulling Tension: | 150N |
| Minimum Bend Radius: | 45mm |
| Applicable Specifications: | BS 7655 Section 6.1 Table 1 LTS 3 |
| Flame Resistance: | IEC 332-3-C |
Electrical Properties
| Maximum operating voltage: | 300V Rms |
| Maximum Continuous current per conductor at 25°C: | 2.9 A |
| Nominal Capacitance between conductors of a pair @ 1kHz: | 79nF/km |
| Nominal capacitance conductor to shield @ 1 kHz: | 154 nF/km |
| Nom. Conductor DC resistance @ 20°C: | 57.4 Ohm/km |
| Nom. Shield DC resistance @ 20°C: | 50 Ohm/km |
| Velocity of propagation: | 66% |