22 AWG (7*30) tinned copper, Polypropylene insulated, 2 twisted pairs cabled on common axis, individual Beldfoil ® aluminium-Polyester shield with 24 AWG (7 x 32) tinned copper drain wire, LSNH jacket.
Mechanical Properties
| Nominal Insulation Thickness: | 0.18mm |
| Nominal Diameter over Insulation: | 1.17mm |
| Twisted Pair Lay Length: | 40mm |
| Nominal Jacket Thickness: | 0.65mm |
| Nominal Outer Diameter: | 4.6mm |
| Temperature Rating: | -15 to +80°C |
| Insulation material: | Polypropylene |
| Sheath Material: | LSNH |
| Sheath Colour: | Chrome RAL 7037 |
| Shield type: | 100% Aluminium Polyester |
| Maximum Pulling Tension: | 220N |
| Minimum Bending Radius: | 40mm |
| Specifications: | BS 7655 Section 6.1 Table 1 LTS 3 |
| Flame Resistance: | IEC 332-3-C |
| Cable Pair Colours: | Pair 1 : Black & Red |
| Pair 2: White & Green |
Electrical Properties
| Maximum operating voltage: | 300 V Rms |
| Max. Continuous current per conductor @ 25°C: | 2.3A |
| Nominal Capacitance between conductors of a pair @ 1kHz: | 115 nF/km |
| Nominal capacitance conductor to shield @ 1 kHz: | 203 nF/km |
| Nominal Conductor DC resistance @ 20°C: | 49.2 Ohm/km |
| Nominal Shield DC resistance @ 20°C: | 54.5 Ohm/km |
| Velocity of propagation: | 60% |